Gaofeng electronic (Hong Kong) Ltd.
Hotline:
+86 769-82061278
轻触开关
拨动开关
带灯开关
按键开关
接口开关
连接器
电池座
4FAQ
Your location: Home: ->  FAQ ->  What is a toggle switch?
Toggle switch A new generation of photoelectric switch equipment made with integrated circuit skills and SMT surface equipment skills. Intelligent functions such as external synchronization, anti-interference, high reliability, stable work area and self-diagnosis. This novel photoelectric switch is an active photoelectric detection system type electronic switch that uses pulse modulation. The cold light sources used are infrared light, red light, green light and blue light. Manipulate the conditions and actions of various solid, liquid, transparent, black, soft, and smoke substances. Driving waterproof and explosion-proof switches touch type travel switches have the disadvantages of low response speed, poor accuracy, touch detection that simply damages the object to be detected, and short life. However, the effect interval of the transistor proximity switch is short, and non-metal materials cannot be directly detected. However, the new type of photoelectric switch overcomes the above defects, and has a small size, multiple functions, long life, high accuracy, fast response speed, long detection interval, and strong resistance to light, electrical, and magnetic interference. Toggle switch

Toggle switch series, photoelectric switch can be used in various applications, to avoid strong light sources, photoelectric switch usually works safely when the ambient illumination is high. However, avoid directing the optical axis of the sensor to strong light sources such as sunlight and incandescent lamps. When the viewpoint of the optical axis of the sensor (receiver) and the strong light source cannot be changed, a light shielding plate or a light shielding tube can be installed near the top of the sensor. Avoid mutual interference. The new type of MGK series photoelectric switches usually have the function of actively avoiding mutual interference, so don't worry about mutual interference. However, when several groups of HGK through-beam infrared photoelectric switches are close to the device side by side, adjacent groups and mutual interference should be avoided. The most useful way to avoid this kind of interference is to intersperse the emitter and receiver, and spread the distance between the two groups. Of course, it is also a good idea to use models with different frequencies.
Toggle switching power supply is a type of power supply that uses modern power electronics skills to control the ratio of the moment when the switch is registered and shuts down, and insists on a stable output voltage. The switching power supply is usually composed of pulse width modulation (PWM control IC and MOSFET. The power supply is compared, and the interest of both is added with the increase of output power, but the addition rate is different. The cost of a linear power supply is higher than a switching power supply at a certain output power point. This is called the cost turning point. The opening and innovation of power electronics skills makes switching power supply skills also different from time to time. This interest turning point is increasingly moving to the low output power side, which provides a wide open space for switching power supplies.
Toggle switch concept
Toggle switching power supply is a type of power supply that uses modern power electronics skills to control the ratio of the moment when the switch is registered and shuts down, and insists on a stable output voltage. The switching power supply usually consists of pulse width modulation (PWM control IC and MOSFET. Switching power supply and linear The power supply is compared, and the interest of both is added with the increase of output power, but the addition rate is different. The cost of a linear power supply is higher than a switching power supply at a certain output power point. The opening and innovation of power electronics skills makes switching power supply skills also different from time to time. This interest turning point is increasingly moving to the low output power side, which provides a wide open space for switching power supplies.

For more knowledge about toggle switches, please continue to pay attention to Dongguan Hengyi Electronic Technology Co., Ltd., the official website URL: www.hy-elec.net

News Center
News
Industry
FAQ
Other sections
Feedback
HENGYI ELECTRONIC TECHNOLOGY CO., LTD.
Address: Building 7, No. 2, Julong Road, Shigu, Tangxia Town,
Dongguan City, Guangdong Province
Phone:+86 769-82061278
Mailbox: sales06@hy-elec.net
URL: en.hy-elec.net
Copyright © 2020 Dongguan Hengyi Electronic Technology Co., Ltd./ Gaofeng electronic (Hong Kong) Ltd./Gaofeng Electronics (Hong Kong) Co., Ltd.